Feeney 5 ft. 3-in-1 Trellis Kit

If you're just not sure what style of trellis your climbing flowers will prefer the most, why not keep your options open with the Feeney 5 ft. 3-in-1 Trellis Kit?

This is a complete, easy-to-assemble, all stainless steel wall mount trellis kit. It includes 1/8-inch diameter rods and special mounting components that you can configure in one of three ways: fan, grid, or diamond. Or, create your own design with the included components. Each of the 13 rods is 48-inches long and can be spliced together using the included Connector Tubes. They're supported by specially designed 2-inch Stand-Off fittings that screw into the wall to hold the trellis upright. Micro Cross-Clamp fittings secure each cross section in place. The standard layouts range in size from 54W x 62H inches to 35W x 69H inches.

Each kit includes:

• 12 stainless steel 2-inch Stand-Off fittings with mounting screws
• 13 stainless steel rods - 48-inches long each
• 6 stainless Rod Connector Tubes
• 16 stainless steel Micro Cross-Clamp fittings
• 12 plastic anchor inserts (for masonry or concrete)
• Installation instructions

To install the 3-in-1 trellis

1. Measure and mark the layout on your wall
2. Drill holes to mount the Stand-Off fittings
3. Screw the Stand-Off fittings to the wall
4. Lace the rods through the Stand-Off fittings and secure by tightening the setscrews
5. Connect intersecting rods with Micro Cross-Clamp fittings
6. Trim the excess rod, and you're done!